Decorating new year's balls with your own hands - a

Christmas balls decorated with beads

Factory Christmas tree decorations are in almost every house. They are certainly very beautiful and with a good combination with other decorations in the house can cause a decent aesthetic effect. But just buying Christmas balls is boring. Uniqueness can only be achieved by making the decoration of Christmas balls with their own hands.

For manufacturing, you will need: yarns (with a large percentage of natural fibers in the composition for good impregnation with glue), PVA glue, disposable glass, round balloons. Stages of manufacture:

  • Prepare glue for work. Strongly thicken to the state of sour cream.
  • Inflate the ball to the extent that the size of the toy is planned.
  • Soak 1 m thread in the adhesive.
  • Wrap the "spider" way so that the free holes do not exceed a diameter of 1 cm.
  • Allow to dry with glue (12 to 24 hours).
  • Get the ball out of the product, gently bursting it and taking it out through the hole of the ball.
  • To decorate the product. For this use: shines, paper felling of different shapes, sequins, beads, semi beads, etc. Products made of yarn can also be painted with paint from a balloon or acrylic. Watercolor and gouache will not work, because they are able to soak the product and lead to its spoiled appearance.

The process of making balls of yarn

Making Christmas balls of different diameters, they can decorate any corner of the house: a Christmas tree, candlesticks, compositions in a vase, on a window sill, etc. Decor of the balls can be done this way: put the light garland on the tray, put on top of the products of different sizes, but the same color. When the garland is on, they will be highlighted and create an interesting effect.

Ball of twine  New Year ball of twine  Ball of thread  Ball of threads with a pattern  Christmas tree of small balls

Balls of white threads

Of beads

Very beautifully and effectively on the tree will look balls of beads. In this case, the decoration of the foam spheres of the blanks will occur. In addition to polystyrene billet need beads, pins (sewing needles with hats, as in carnations), tape.

Ball of beads

The manufacturing method is very simple:

  • String one bead on one pin.
  • Attach the safety pin to the foam base.
  • Repeat actions until there is no free space left on the basis.
  • At the end, attach a loop tape for hanging the decoration.

Christmas balls of beads

Beads are desirable to take one size to avoid empty seats based on. The color scale is chosen in one tone and in different. Everything depends on individual preferences and the overall style of decorating the room. Instead of a foam base, you can use plastic factory balls. Only here to fasten beads in this case will not be on pins, but on hot melt.

Read also: Ideas of decor of cones

Ball of beads of different sizes  Yellow is not  Multicolored beads  Balls on the Christmas tree  Ball decorated with paillettes

From the buttons

No less original and unique will look at the Christmas tree balls of buttons. Old unnecessary buttons can not necessarily be selected in one color scheme. After all, they can always be repainted and get the right shade. Effectively look in gold, bronze, silver shades, as well as all colors with a "metallic" coating.

Christmas tree toys of buttons

To make such decor of Christmas balls, you need: buttons (can be with a through fastening and hidden), hot melt, foam plastic or plastic blank, tape.

  • Apply a small amount of hot melt adhesive to the inside of the button.
  • Attach the button to the base.
  • Proceed from step 2 until the entire surface is covered with buttons.
  • Attach the ribbon so that the ball can be suspended.

Balloon decorated with colorful buttons

Placing on the Christmas tree, you need to monitor that they were not too much concentrated in one place. It is better to dilute such decorations with others.

New Year's ball of buttons  Red ball  Decor of the ball with buttons  Decor of the New Year's ball     Beautiful ball decorated with buttons

From paper

Original Christmas balls can be made simply from paper without using any basis.

Ball of colored paper

To do this, you need a tight (about 120 g / m2) paper, scissors, pins, clips, tape. It is very simple to make a workpiece.

Toy made of paper

  • Cut 12 strips of paper with a size of 15 mm x 100 mm from paper
  • Fasten all strips from one side and the other side with pins, retreating from the edge by 5-10 mm.
  • Straighten the strips in a circle, forming a sphere.
  • Attach the tape to the bottom of the ball.

Strips can be cut not straight, but with other uneven lines. You can use the figured scissors.

Balls of paper with sparkles

Corrugated paper

Corrugated paper is also useful. Pompons are created from it. To do this, you will need: corrugated paper, glue, scissors, tape.

Decoration of foam balls

  • If the paper is new and packed, then from the edge, measure 5 cm and cut off. Then again measure 5 cm and cut off.
  • Two blanks cut into a scallop with a strip interval of 1 cm without cutting to the base of 1.5 cm.
  • Dissolve one piece and begin to twist "flower" in a circle, gradually gluing together. Get a pompous pompom. Repeat with the second workpiece the same actions.
  • Connect two pieces of pompons to the glue in place of gluing. It will be a magnificent ball. Attach a loop tape to the place of gluing. Swell the resulting pompom.

Ball decor with corrugated paper

Two-sided colored paper

You can also make a ball of two-sided colored paper. For this you need: colored paper, scissors, glue, round object (cup, for example), tape.

See also: Decorative panel on the wall with your own hands +75 photo

Double-sided paper ball

  • Circle the cup on paper 8 times. Get 8 equal circles. Cut them out.
  • Fold each circle four times.
  • Cut an extra circle with a smaller diameter.
  • Glue the workpieces to it with corners to the center on one side (4 pieces fit), and on the other hand so itself.
  • Open each crease and glue together at the junction. You will get a ball with "petals".
  • Attach the ribbon.

Two-color balls

Balls of paper, as a rule, do not serve for a long time and are used one season. There is no need to place them in a large number on the tree, it is better to "dilute" them with other ornaments.

Rainbow Balloon

From fabric

If an old blouse was stuck in the closet, which it is a pity to throw away, then the rejection of recycling was the right decision. From it you can make a pretty Christmas tree toy. We need knitted fabric, scissors, sewing needle with thread, cardboard, ribbon.

Bowl decorated with strips of fabric

  • Cut as much as possible long strips of fabric 1 cm wide and stretch each strip so that it twists the edges.
  • Cut the cardboard in the size of 10 cm x 20 cm.
  • Wind the strips obtained on the cardboard in the width.
  • Center with one and the other side to connect the strips with a needle and thread. Pull out the cardboard.
  • Cut the formed loops along the edges.
  • Loose and fasten the tape.

Balls with striped fabrics

There is another way, which involves decorating a piece of foam plastic or plastic blank with a cloth. Need any fabric (you can have different colors), hot glue, scissors.

Balls of fabric of different colors

  • Cut the fabric with rectangular pieces of paper, 3 cm x 4 cm.
  • Fold them like this: the top two corners to be folded to the center of the bottom.
  • Glue to the workpiece in rows, bends inward from the bottom.
  • Обклеить весь шар. Attach the ribbon.

The ball is pasted with cloth and string

Appliques from the fabric can be made various, using also additional improvised means - beads, braids, rhinestones, ribbon.

Ball of fabric applications

With embroidery

Decorating New Year's balls with their own hands is also possible in this way. The new trend was the decoration for the Christmas tree embroidery. To do this, use a pre-embroidered image. You also need a fabric, a piece of foam plastic or plastic, hot melt.

Embroidery on fabric for a ball

  • Attach the embroidered image with glue.
  • Zadekorirovat the remaining area of ​​the ball application of fabric.

Instead of appliqués, you can use the same fabric on which the embroidery was made. Alternatively, you can make a pattern from the fabric, where one of the pieces will be embroidery. You can also decorate each part of the pattern with individual embroidered images and fasten. After these actions, you can additionally add as decor beads, rhinestones, sequins, sequins.

Embroidery on Christmas-tree toys

With filling

Effectively they will look like on the tree, and in the composition of the compositions of the balls such specimens. To make unusual balls you need to stock up with plastic transparent billets.

Read also: How to decorate a vase with your own hands - decor ideas

Decoration balls with colorful grains

Having opened the hat-holder, inside you can create different compositions:

  • Pour inward acrylic paint of different colors, shake the ball so that all internal walls are painted, allow to dry. Pigment will stain the inside of the workpiece and it will acquire a unique color.
  • Fill the inside with small colored feathers and beads.
  • You can also fall asleep inside confetti of different colors.
  • Pieces of old tinsel are used for filling.

Transparent sphere with composition inside

  • Favorite photos are also located inward. To do this, you need to twist a small photo into the tube (look at the diameter of the ball) and straighten it inside. Add confetti or paillettes.
  • Colored cotton fill the inside and complement the beads. Colors can be chosen different. Stain better in acrylic paint. Fill after completely drying the cotton wool.
  • Multicolored sisal can be placed inside and enjoy the color and originality of the decoration.

Fantasies about filling a transparent ball can be different. All of them relate to personal preferences and moods during needlework.

Glass ball filled with buttons

With a variety of decor

You can attach anything to the workpiece. Here are some ideas:

  • Tapes. From the tapes you can make different patterns (geometric themes, monograms, stripes and stuff). Strengthen them with a hot glue.
  • Sequins. The braid of the sequins is wound around the circumference and fixed with hot melt. You can select several colors for the combination.

Balls with weaving of paper

  • Braid. Different tapes from any material are also suitable for decorating Christmas balls.
  • Lace. It can be supplemented with half beads or rhinestones. The organza ribbon will also be combined with lace.
  • Paper felling. Various figures made with the help of a figured puncher will decorate any ball.
  • Felt logging. Attached felling-figurines of various themes will be conveniently placed with glue from a thermo-gun.
  • The old costume jewelry. Lost earrings or unnecessary brooches in combination with other decorative elements will give a special glamor to the decoration.

Balls with applique

Outcomes

You can buy ordinary Christmas balls to decorate the room for the New Year. But it will be just jewelry, like everyone else. Only the decoration of New Year's balls with his own hand can bring a segment of uniqueness and soulfulness in the interior. To do this, you only need a wish and some materials that will surely be found in every home. Christmas balls do not only be nice, but also fashionable. "Hand maid" in recent years has become even more popular. Therefore, to create Christmas balls is not only popular, but also useful for your own home.

Gold and red  Example of decorated balls  Toys for a Christmas tree of light bulbs  Purchased Balls  Ball with embroidery Ball of paper strips  Ball of buttons  Felted bead decorated with beads  Snowflake Balloon  Bowl with bow Candles on a Christmas tree of paper  Ball of acorns

LEAVE ANSWER