Decorative partitions in the interior of the room - ideas of

Decorative partition in the kitchen

When there is a need for re-planning of a single room or apartment as a whole, decorative partitions can come to the rescue. Because they not only perform an aesthetic function in the interior, but also serve as an excellent tool for zoning. The original layout could be extremely unfortunate: small rooms caused claustrophobia, and large ones were too uncomfortable, too spacious. In such cases, partitions allow rational use of the useful area and competently demarcate space. And the design of these practical products ensures the transformation of the interior beyond recognition. Sometimes this is the only right decision that the owner of the house can take to achieve comfort. Next, consider the main characteristics and options for their use.

Among the advantages of using this decorative element are noted such as:

  • Aesthetics and originality of performance;
  • Wide range of used materials;
  • No restrictions for design ideas;
  • Long service life;
  • Ecological aspect.

Lightweight fabric folding screens

The shortcomings include a weak soundproofing or a relatively high cost of some models. Depending on the layout, there are two main types of decorative partitions in the interior:

  1. Partitions for room zoning;
  2. Interior partitions in the interior.

Partition in one room with curtains

The partitions can be sliding (rotary) and stationary. The first are often used as interior doors-compartments on roller rails.

Forged folding partition

The use of partitions depending on the purpose of the rooms

Living room

The multifunctionality of this premise puts forward its own requirements for the organization of space. Since here it is not only a festive reception of guests, but also often a family dinner. All members of the family are going to discuss each of their interests. Therefore, it is necessary to fully satisfy their potential needs. Perhaps even the use of several decorative partitions.

Partition of wooden cubes in the living room

Before installing the product, you need to make sure that the location for its placement is selected correctly.

Partition of patterned stencils

It is recommended that you read the articles on the design of a modern interior, where different zoning options for rooms can be offered. The arguments that are given there may affect the further planning. For example, you can divide the dining area and place for rest with an elegant screen or a stylish glass partition. The use of specific materials should be guided by the general color scheme of the living room, a type of furniture set.

See also: Wallpapers with flowers +75 photo examples in the interior

Partition of decorative panels

Another option to accommodate a variety of different accessories, colors or books can be a decorative partition - a rack. The comfort that it can provide, allows you to fill the modern interior of the room with a real cosiness. A similar effect can be achieved when used as a partition - a decorative, built-in aquarium. Since his sides will be open for both zones, he will be able to perform a complex task: decorate each zone, leaving them at the same time separated from each other.

Separation of the room with a rack


Often, in small apartments have to combine the bedroom with a study. Lack of space affects sharply the general feeling, which leads to the impossibility of both recreation and fruitful work.

Bunny surroundings with glass blocks Japanese style screen

The use of decorative partitions helps to solve this problem. The screen of various shapes allows you to ensure privacy for each member of a married couple.

Semi-transparent carved partition between living room and bedroomSemi-transparent carved partition between living room and bedroom

Desktop near the partition


The main function of the partition in this room is to delimit the space for cooking and eating. Partitions in the interior of the kitchen stylishly ennoble the dining area, at the same time allowing to improve the practicality of the zone for cooking.

Patterned square stencils

Very convenient in operation is a wire screen on a wooden frame. It is used to place kitchen accessories, leaving the same galvanized material is extremely simple. Such a decorative partition can have a variety of shapes.

Stained glass as a partition

Children's room

It will be necessary to divide into three functional zones: for recreation, study, and also a playground. This zoning allows you to leave a mess in the place provided for this. Another space will be used for practical purposes of education. Often, for such an organization of the interior, a decorative partition of the box structure is used to additionally have the opportunity to fill it with something useful.

Plasterboardный стеллаж

The main types of decorative partitions in the interior

Decorative partitions in the interior, designed for zoning the room, can radically alter the perception of space by minimal means. At the same time, the achievement of the desired effect does not imply the destruction of the wall or ceiling surfaces of the room.

Black partition folding

It will take only a partial removal of the floor covering. The parameters and the form of the designer's product are selected according to the taste of the owner, since there can not be any significant limitations. The partition for room zoning can reach the ceiling height or not exceed the growth of the smallest member of the family. The situation is similar with the width. Regarding the selection of material, we will consider the following types.

Read also: Decorative PVC panels

Glass Blocks


With the help of this material it is possible to realize practically any fantasy, since their installation or dismantling does not imply absolutely any difficulties. Drywall products are characterized by a light weight, lightness, which determines the ways of their application. Finishing the same surface of such a partition can be very different.

Aprons and shelves with illumination

It is not recommended to give a serious load to the decorative partition of gypsum board. Maximum of up to 15 kg. Also has a high moisture permeability.

The project of differentiation of the room

The demand for this kind of decorative element is related to the fact that it allows to reliably hide engineering communications and is fire-resistant.


Also very popular is this traditional material. Usually decorative brick is used where it is impossible to do without stationary partitions, since dismantling of this type is characterized by its obvious labor intensity. The design properties of the noble material are perfect for a variety of interior design styles (country, Provence, etc.).

A piece of brick wall


Wooden partitions perfectly combined with any style of the room, except for frank high-tech. Often are the main element of the decor, attracting all the attention of guests. A carved, perfectly polished product made of natural wood exquisitely decorates the interior.

Carved counter in the hallway

Material for the frame of a structure, can serve as boards (cant timber) and MDF. Finishing involves the processing of natural materials with paint and varnish solutions. After this procedure, the wooden partition will be distinguished by its reliability and strength to mechanical influences. Among the shortcomings of the use of the material is called fire hazard, as well as the inadmissibility of excessive moisture.

Stylish wooden screen


The glass products are designed to preserve the useful space as much as possible while leaving a sense of openness. Matte glass partitions quite clearly demarcate functional zones, without heavier or visually reducing the interior.

Heavy-duty glass in the office

The shortcomings of this type include the obvious need for regular rubbing of the glass plane, as well as the inability to hide engineering communications in the decorative element. However, the aesthetic side of the material compensates for this deficiency.

Sliding stained glass windows

On the glass it is possible to apply patterns, as well as photographic shots.

Glass используется как для стационарных перегородок, так и в качестве раздвижной ширмы. К преимуществам применения данного материала относят отсутствие препятствия для прохождения света, устойчивость к перепадам влажности и температуры, долговечность.

See also: Drawings on the walls in the interior +75 photo

Long Swivel Panels

the cloth

When a solid partition is not required, partitions made of cloth (curtains, drapes) are used to zoning the premises. The material features assume both rotary and sliding partitions. This decorative element requires the installation of a special eaves with guides on the ceiling.

Textile screens

Using this design allows the canvas to easily slip and delimit the space of living rooms. In the bedroom, a screen made of cloth makes it possible to retire, and in the living room to organize a home theater.

Screen for bedroom


Convenience of the design of the shelves is in the future location on open shelves of various accessories, whether books or fixtures. Moreover, the shelves can be opened on several sides, for each functional zone.

Rack для разграничения пространства

Metal forging

For this decorative element, a certain approach is required, since it will look under the condition of a specific style of decoration of the room.

The screen is made by forging

You can call such options for interior design, as modern or art deco. Forged metal is used when it is necessary to place a fireplace in one of the sections of the room. Polished steel - when the design refers to the style of hi-tech.

Elegant decorative screen

Production of decorative elements with your own hands

Partitions can be made with your own hands, but without suitable tools it will be extremely difficult. Gypsum cardboard material is a simple for making a decor element. For example, consider the procedure for creating a fixed partition to partition the space into zones.

Reed Screen

  1. Markup. The profile of plasterboard width of up to 5 cm laid on the floor, then circled with chalk. The workpiece is attached at a distance of one centimeter from the contour line;
  2. In the same way, the layout under the racks is carried out;
  3. A profile of about 2 m in height is fixed to the wall by means of screws;
  4. The marking of temporary jumpers is made for the further installation of the shelves;
  5. The frame of the proposed construction is sewn up (width is recommended up to 25 cm). To do this, from each side carefully cut whole sheets of drywall. The remains will then be used for skinning the ends;
  6. The perforated corner is fixed by means of a stapler;
  7. Finishing is made in two stages: reinforcing, then finishing.
Such decor can be made by own handsSuch decor can be made by own hands

Subsequently, the ready-made structure of the partition can be decorated at its own discretion.

A glowing screen made of twigs and garlandsUnusual glowing screen made of twigs and garlands



The use of designer products in the interior is often due to the need for functional zoning space: whether it is a stationary partition for zoning a single room or installing sliding interior partitions. However, they can also be used as purely decorative elements, with the aim of aesthetic design of space.