The main and final stage in the construction of any house is the creation of a high-quality and beautiful roof. The roof made of metal tiles is a modern and durable alternative to classic slate, which has a lot of positive qualities. A large color gamut allows you to create a roof of almost any color, and a small weight of sheets makes the installation of the roof very fast. A bright tiled roof will give your home a uniqueness, as well as visually separate from neighbors' houses. In this article, we will talk about the positive and negative qualities of metal roofing, as well as about its proper installation by one's own hands.
Roof of metal tile - positive and negative qualities:
The positive qualities of the roof made of metal:
- High strength, including shock loads;
- The big color scale;
- Due to its low weight, the material is easy to transport and install on the roof
Negative qualities of the roof made of metal:
1. Poor thermal insulation; 2. Poor sound insulation; 3. The propensity of the metal tile to form condensation However, if the installation process is carried out in accordance with all established technical standards and using modern insulating materials, then all the above negative qualities will not affect the operation of the house in any way.
Quality roof made of metal tiles by own hands
To the roof served for many years, and with it there were no problems, you need to perform the correct installation. The procedure for decking metal is not very difficult, however, it requires some skills and the availability of the necessary tools. If you are not confident in your abilities, it is better to contact a construction company whose specialists will conduct a high-quality installation of metal roofing and give a guarantee for work.
Preparatory work before installing the roof of metal:
Since the correct roof made of metal tiles is made of several layers of different materials, before beginning the laying of the roof, it is necessary to familiarize yourself with the installation rules for these materials. The next moment will be the estimate of the cost of coverage. You need to calculate the roof area, determine the angle of its slope, and proceeding from this, determine the required amount of materials. The greater the angle of the roof, the greater the load, in the form of a snow layer in winter, it can carry. Accordingly, with a greater slope, you can use metal from a thinner metal. In order to use metal roofing as a covering for the roof, the minimum angle of inclination of the roof from metal should be not less than 14 degrees. This is necessary to ensure that in the winter on the roof did not accumulate a large amount of snow.
The list of preparatory works before the installation of the roof from metal:
The first thing to cost is to lay the waterproofing on the black crate. Best of all, if it is a superdiffusion membrane, which is a special film that neutralizes the formation of condensate under the metal tile. Laying of the membrane is made from the edge of the roof to its ridge, overlap by 15 centimeters. The next stage will be the laying of heat and vapor barrier. And the final stage of preparation is the installation of a finishing crate for metal tile, as well as the processing of wooden parts with antiseptic compositions that prevent decay.
Correct installation of a roof from a metal tile
After doing the necessary preparatory work, you can start laying the most metal. Laying of sheets of material begins with the edges of the roof, while leaving a protrusion of 40 centimeters. Fastening of metal tile to the lath is done by screws of the appropriate color with a rubber gasket under the head. For convenience, you can use a screwdriver or a drill with a special bat. We bring to your attention photos of roof houses made of metal.