Each owner of the land plot wants to furnish it with maximum functionality. Using the project baths from the bar 6x6 with an attic, you can build a practical and comfortable construction of a small size. For small areas, this may be the only possible solution. Even in a vast yard there is no sense in building a huge bath complex with the size of 6x22 m. It is much more expedient to use land for growing vegetables, fruits and berries. Consider the advantages and advantages that the 6x6 bathhouse project has with an attic.In addition, the reader is invited to familiarize himself with the types of timber that is used in the construction of a bath with an attic and a terrace.

And a sauna and a nice spacious house with a loft for living and rest from early spring until late autumn. The house made of timber is designed with a large terrace and balcony, this project is suitable for the southern regions of Russia.

In this article, read:

• 1 Advantages of a two-level bath
• 2 Wood for construction
• 3 Of what do the walls
• 4 Planning of construction
• 5 The bathhouse in the house with a penthouse of timber. Video
• 6 House with attic and bath on the first floor

Advantages of a two-level bath

The attic is a small room located directly above the bath. Despite the small area, it is quite practical to equip the second level.

Projects of baths with a penthouse provide for the arrangement on the second floor of such premises:

• rest room;
• the original bar;
• gym;
• workshop;
• living room;
• storage;
• home theater.

In addition, that the owner of the property receives an additional room, there is obvious economic benefit.

It consists in the following:

1. Due to the location of some functional rooms on the second level, the area of ​​the steam room, shower room and locker room significantly increases. This is quite a significant factor if large companies visit the bathhouse.
2. Significantly reduces the size of the foundation. Considering the considerable cost of cement and the efforts that must be made, a good economy of effort, money and time will be obtained.
3. If you use in the construction projects of saunas from a profiled beam with a veranda, you can not build an arbor. The veranda can be fully used in this capacity all year round.
4. Modern technology makes it possible to conduct heat insulation of the attic so qualitatively that it will be comfortable in any season of the year.
5. The standard size of the bar is 600 cm. This makes it possible to construct a square dacha of 6x6 m practically without waste.

A rather popular solution are the houses of the bathhouse with an attic. In such buildings, almost all amenities are under a common roof, which is quite practical, especially in inclement weather. A sauna house with a loft of logs requires a special approach in terms of fire safety. Saving construction materials in the construction of holiday complexes with a sauna is quite small. In addition, it is worth remembering that the bath is a source of high humidity. This may be the reason that in the residential area there will be increased dampness. The project of a house with a sauna should provide a reliable waterproofing between the residential area and the bath complex.

It is more advisable to put saunas from logs with an attic in such a distance from the apartment house that the slightest risk of its ignition is excluded at a fire in a bath. The probability of a fire can be minimized if the wood is treated with high-quality flame retardants.

A spacious rest room in the house with a bath. At this table can accommodate a large company or a friendly family, and at night a warm room can turn into a bedroom for guests.

One of the options for planning the first floor of the house with a bath. The oven in the center of the room allows you to keep the heat in the steam room and in the relaxation room.

• 
• 
• 
• 

Wood for construction

Projects of saunas from a bar assume the use of coniferous wood for the construction of saunas. It has various qualities that affect the thermal insulation and the durability of the building.

When building wooden saunas with an attic, the following types of wood are used:

1. Pine. This wood has a small specific weight. Products made of pine are easily sawed and bored. Laying pine logs and timber is quite simple. Positive properties include affordable price and low thermal conductivity. But the pine is not resistant to dampness. When it dries, it deforms and becomes covered with cracks.
2. Cedar. This wood has a higher density and thermal conductivity. The degree of desiccation in cedar is much less than in pine. The high content of resins in the fibers prevents wetting and the appearance of the fungus. The price of products is quite high.
3. Larch. This wood has a high resistance to moisture and mechanical stress. Due to the high density of products from larch are very heavy. This somewhat reduces their thermal insulation properties.

The choice of material depends on climatic and weather conditions, the financial possibilities of the owner of the site.

The modern building material is a profiled beam made of pine, a steeper and more expensive profiled glued beam.

• 
• 
• 
• 
• 
• 
• 
• 

What are the walls made of?

The projects of wooden bathhouses are made taking into account the fact that their walls can be constructed from crowns of different configurations.

Projects of wooden saunas envisage the use of such sawn timber:

1. A massive timber. This is the most affordable product, having smooth walls and a square section.
2. Profiled bar. Saunas made from a profiled bar with an attic have walls, on which the appearance of crevices between the crowns is excluded. This is achieved by machining a massive beam so that recesses and protuberances are formed on its surface. When connecting, they are closed.
3. Glued beams. This is the most durable, expensive and durable product. It is obtained by gluing several boards.
4. Round logs. A sauna with a mansard from a log, whose designs are quite diverse, looks very nice and stylish. The construction of round logs does not require professional skills and can be carried out by amateurs.

If the sauna will be used only in the summer time, then it can be built from a massive timber. For all-season buildings, it is necessary to use more qualitative material.

Planning of construction

After the site for construction is selected, design documentation is produced.

It includes such data:

1. Foundation. As a rule, a foundation of belt, pile or columnar type is arranged for buildings from wood.
2. Detailed scheme of the first floor. At the first level, it is advisable to arrange a corridor, a dressing room, a steam room, a washing room and a rest room. The scheme should be applied window and door openings, stove and staircase.
3. Drawing of the attic. The attic can be equipped with a balcony, access to which is equipped with a transparent plastic door.
4. Roof scheme. The optimal solution is to build a gable roof covered with slate, corrugated board or tiles.
5. Water pipes. The best option is to equip the pipeline with reinforced polypropylene pipes.
6. Electricity.

The terrace can be built after the completion of the sauna. Attachment to the bath is recommended to be installed on concrete blocks or screw piles. The terrace can play the role of a gazebo.

Bath in the house with a penthouse of timber. Video

House with attic and bath on the first floor

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
•